Tools, Materials and Making Safely
Good makers choose the right tool and the right material for the job, and they always work safely.
Four Practical Skills
- Cutting: scissors for paper and card, a junior hacksaw for wood or dowel, a craft knife only with an adult.
- Shaping: bending, folding, sanding, moulding or carving a material into the form you want.
- Joining: glue, tape, nails, screws, staples, bolts or stitching, depending on the materials.
- Finishing: painting, sanding, varnishing, decorating or adding labels to improve how the product looks and works.
Materials and Their Properties
The properties of a material are the things that make it suitable or unsuitable for a job.
| Material | Properties | Used for |
|---|---|---|
| Wood | Strong, can be cut and shaped; hardwoods are harder than softwoods | Furniture, frames |
| Card and paper | Cheap, easy to cut and fold | Models, packaging |
| Plastic | Waterproof, lightweight, can be moulded | Bottles, toys |
| Metal | Strong, conducts electricity and heat | Wires, pans, tools |
| Textiles | Flexible; can be natural (cotton, wool) or synthetic (polyester) | Clothes, bags |
| Foam and clay | Easy to shape | Models, prototypes |
When choosing materials ask: Is it strong enough? Is it flexible or stiff? Waterproof? Safe? Affordable? Can it be recycled?
Measuring and Marking
- Use a ruler and measure twice, cut once.
- Mark with a pencil before you cut.
- Use a try square or template to keep angles square.
Working Safely
- Tie back long hair, roll up sleeves and wear goggles or aprons where needed.
- Cut away from your body, and hold materials in a clamp or bench hook.
- Carry sharp tools with the points down.
- Keep your workspace tidy, and tell an adult straight away if something breaks.
- Wash your hands after using glue or paint.
Evaluating Your Making
Check: Is it accurate? Strong? Neat? Does it meet the design criteria? How could I improve the finish?
Curriculum link: National Curriculum in England: Design and technology programmes of study (DfE) — Make: select from and use a range of tools and equipment to perform practical tasks (for example, cutting, shaping, joining and finishing); select from and use a wide range of materials and components according to their characteristics